-
Good Day,
I have a problem with connecting this LCD to my MKS Gen L V2.1 on Marlin 2.0.9.1.
LCD lights up, but no visible text appears.
EXP1 wire inverted (if it wasn't nothing would have appeare…
-
- [x] Parts Required
- [x] Assembly
- [ ] Firmware
- [ ] Сalibration
- [ ] Printing
-
Can not find any description for a new 1.0.1 pro board (429) where is explained the function of that tactile button switch next to the SD slot and aligned with a wifi card black connector.
![20220527…
-
I’ve had the Skr v1.3 for a few months now and it’s worked flawlessly until recently. I’ve burnt out 2 touch sensors and now when in the middle of a print, over an hour or so long, well, the print jus…
-
I have an example dual endstop for lowrider. I believe it is dual yz. But the Z endstops are a problem.
I think it would be best if the home dir was +1, and we set up the probe on Zmin. The two Z e…
-
Hi,
Is somebody meet this kind of error ?
I try to use bed temp sensor, an error "E1 THERMAL RUNAWAY" is display at boot .
I checked pins configuration, but i do not understand what is wrong.
Fai…
-
Powered my board only via the USB-C connection of the board. The power LED is not flashing red and there is not device in the serial list. Jumper cap onto the VUSB. What's wrong?
-
Would LOVE to see this feature in S3D!!! They have a post processing script so if it could be done via the command line to already sliced gcode. Is this possible?
-
### Description
### Steps to reproduce
1. [First Step]
2. [Second Step]
3. [and so on...]
**Expected behavior**
**Actual behavior**
### Additional Information
* Include a Z…
-
Hi all,
Just bought a new BTT SB2209 with an RP2040 and wanted to install Katapult to be able to flash it over CAN. I ran through the instructions until it was time to flash to the board, and I was…