-
### The problem
Some sensor enities have been changed to buttons in the Z-Wave intergration
Currently, I see this with the according devices:
Carbon monoxide FireAngel
Heat Detector FireAngel
…
-
### TFT Version
4.3.11
### Firmware Version
4.3.11
### Blueprint Version
4.3.11
### Panel Model
EU
### What is the bug?
In my case, no temperature is displayed under the wea…
-
If Uptime Kuma is in maintenance mode, and Home Assistant is restarted, binary sensors will become disconnected and sensors will become "unavailable".
Once Home Assistant is fully restarted, binary…
-
### The problem
Began receiving notifications at every update when set to 1 minute. At 2 minute updates the frequency of notifications was reduced. I've had to disable notifications since this issue …
-
### The problem
Again problem with TUYA integration , binary sensors do not update status . after update to 2024.7.0 .
Motion sensor, door opening . After the first status change (motion detected…
-
### The problem
I checked the logs, after installing HA core 2024.11.0 and found the message shown below.
### What version of Home Assistant Core has the issue?
core-2024.11.0
### What was the las…
-
Hallo
Ich glaube ich habe ein ähnliches Problem wie der Kollege aus dem anderen Tread.
https://github.com/Bouni/luxtronik/issues/11
Allerdings habe ich wie du auch da schon beschrieben hast noch …
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…
-
Hello,
I can't find those binary sensors (Roborock Q8 Max Plus) :
- Mop attached
- Water box attached
Also the control "Sound volume" is not working (NaN).
-
We should find a way to avoid this on the installed binaries, or require to install the requested dependency:
```
[rospack] Error: package 'realsense2_description' not found
[librospack]: error …