-
#### Issue details
I have some F4 Boards(CC3D REVO，F4BY) ,use the onboard calibration is stopping at 99%? I guess the issue is MP cannot read final calculation from flight control. I think this is a…
-
*embedded-hal* has done a great job in reducing the combinatorial complexity stemming from the *m:n* amount of *microcontrollers:devices*. But this is only part of the complexity problem present in cu…
-
Some faults I can think of off the top of my head:
- Any dropped messages in pubsub
- Failing any chibios debug check
- CAN FIFO overflows
- Param flash page full
@MitchKoch @bugobliterator can…
-
Related to #1.
We won't block the book on this, but it would be great to have some examples to point at and documentation around integrating Rust with common RTOSs. We can collect links and resourc…
-
## Expected Behavior
Successful flash of ArduPilot, ChibiOS, Multirotor stack to Pixhawk 2.4.8
## Current Behavior
After following instructions and clicking the OK button and waiting quite a long…
-
First of all,
Thanks to @barthess, @fpoussin, and everyone else who contributed to providing NAND flash driver.
I recently tried moving from 18.2.0 to 20.3.2 and had following issues:
1. For Chi…
-
### Describe the Bug
**Keyboard**
Viktus Styrka (MX version)
**Firmware where Bug Occurs**
1. Default firmware compiled by QMK Configurator ([default styrka](https://config.qmk.fm/#/viktus/sty…
-
## Describe the Bug
Hi folks,
Since the breaking changes "2020 Feb 29", the Audio features on the Planck rev6 (STM32F3 mcu) are kinda messed up, the notes plays waaay too fast.
I've bee…
-
Необходимо разработать автономный дрон
1. На напечатанной раме диаметра 550 мм собрать дрон: взять моторы, винты из 7-ки
2. Соединить дрон на Pixhawk Radiolink по UART к Raspberry Pi 5 (8GB) в корпусе…
-
https://en.wikipedia.org/wiki/SENT_(protocol) is the future, while it's pretty far Hellen should definitely support at least one input maybe two
on the software side at the moment we use STM32 ICU …