-
### Godot version
4.0 alpha 1
### System information
Linux Manjaro, Vulkan, Intel Kaby Lake
### Issue description
I had a saved .tres of an environment that I used in Godot 3. In Godot 4, all the…
-
I have a stream which contains mixed PicStructs (combinations of Progressive, TFF, BFF, Field_Repeat). When decoding and resizing through VPP the frames jumps up and down in vertical direction. It als…
-
Just about every .cc file includes system.hh, and system.hh includes 84 header files including STL and boost.
Just the boost header files that are directly included alone, not counting STL header f…
-
### Godot version
4.0 alpha 10
### System information
Linux Manjaro, Vulkan, Intel Kaby Lake
### Issue description
Shader editor can only search in current file. This is weird, considering script…
-
First, many thanks for providing this tool.
When tested on RHEL7.7 on a Lenovo Thinkpad T480p I get this warning message if I try to run the command manually -
[W] Bad kernel config: you need CO…
kmarf updated
4 years ago
-
Hi, I also have a lattitude 7390 (not 2-in-1). I used some generic EFI for kaby lake to install ventura (13.5.4?). the system boots and runs, but with some problems, mainly 1) no built-in speaker/mic …
-
```
hardware_class EVE D6B-A6B-C4C-F8N-P8A-A36
CHROMEOS_FIRMWARE_VERSION Google_Eve.9584.95.0
cpu Intel(R) Core(TM) i5-7Y57 CPU @ 1.20GHz ("Kaby Lake")
```
attempted to use Gallium OS 2.1 i…
-
Board: ASUS PRIME Z270-P (Kaby Lake)
BIOS: 1205 (2018/05/25)
After updating BIOS I've found a new option under PCH-FW Configuration.
![](https://i.imgur.com/tgLZ0J6.jpg)
Is this effectively …
-
I ported some code to use kfr::biquad_filter and it ended up slower. To try to find out if it was something else causing this, I wrote a simple test program that benchmarks kfr::biquad_filter vs the …
-
**Sway Version: 1.8.1**
When a mode includes pango markup, upon entering that mode the "raw pango source" is briefly shown before the rendered result is displayed. On one laptop (Intel Core i5-7Y54…
camoz updated
6 months ago