-
Brian reported that the alignment on Gerald is way off when he came in tonight. It's not cutting through in the further side of the bed and he spotted that the red targetting laser dot was straying o…
-
I have made an new SGV in inkscape file with use of some clipping. This image is not imported correctly.
Still pretty new to lasercutting, could be I am doing something wrong. Will try to avoid using…
-
During a g0 seek in M3 laser mode, the spindle (laser) can be turned on if subsequent g1 commands are fed to the planner.
This seems to be a consequence of line 195 in motion_control.c.
At this poin…
m-g-m updated
2 years ago
-
### Machine Context
for laser engraving using dither makes the moves "stuter" becouse of the comunication overhead or planning buffer
using gcode clustering for engraving has proven sucsesfull in ma…
-
-
How to make dots on the top of the gel?
The dots can be used for pose tracking and many other algorithms.
Is it print, paint, or laser cut?
-
hi . i build a laser machine with **80w 24v diode laser**( twotree brand) and buy **mks dlc32 v2** board for control this laser head. and update mks firmware to lasetes V2.30_H35_2022_1223_N_ZX_001 (…
-
also implement optional checking of laser cuts by pclint
-
Hey,
Am sure you've already thought of this, but I was just wondering how the software selects the frame to start calculating the 4 s post-cut from? Does it take it directly from the metadata, or from…
-
Typically in laser cutting we want to cut out all the interior lines (holes in a part) before cutting around the perimeter of a part. When a part is cut free from the sheet material sometimes it's po…