-
Name of spec to be reviewed: CSS View Transitions 2
URL of spec: https://drafts.csswg.org/css-view-transitions-2/
Do you need a reply by a particular date? No
Please point to the results of y…
noamr updated
3 months ago
-
How about a feature that will allow the device to sound an alarm (including flashing the torch) several seconds after detecting motion above some threshold? I understand that the original intent of th…
-
### Minetest version
```true
Minetest 5.8.0 (OSX)
Using Irrlicht 1.9.0mt13
Using LuaJIT 2.1.1700008891
BUILD_TYPE=Release
RUN_IN_PLACE=0
USE_CURL=1
USE_GETTEXT=1
USE_SOUND=1
STATIC_SHAREDIR="…
-
I don’t know if I can ask the following question here?
I have the LCS version and it works perfect with all the tools placed here.
One thing I’d like to add is an integration with Domoticz.
If …
-
Further to the previous meeting, I thought we could discuss here what to do about stucture and automatic building for the documentation.
I think we agreed that:
- it would not be possible to chang…
-
If you pass a mesh to the motion planner and there is no mesh at that filepath it will print an error, but just continue with the motion plan. This could lead to unexpected behavior and motion plans t…
-
Hello,
We have just installed the XA30 version R017pre9. After converting from VE11E, we have noticed that the GRE option for the reference scan is not available for selection in the Dot Cockpit. …
-
![image](https://github.com/user-attachments/assets/7a7604db-2601-4474-a178-ca1ff3c6b84c)
![image](https://github.com/user-attachments/assets/e04ee0ff-8a63-446a-a2e5-7a8d4db9d2d9)
![image](https://g…
-
We are using xarm_moveit_servo to teleop control our xarm 7 using an xbox controller, but we found that the gripper controller is not launched from the servo nodes. How can we open/close the xarm grip…
-
I was using pygame to play a message on my Raspberry Pi whenever a motion sensor activated and it worked fine for 10-12 hours, then the sound stopped coming out of the speakers. The program continued …