-
### Description
X-axis TMC2130 driver randomly disconnects/fails in the middle of the leveling routine. The bug is always on the X-axis, even after swapping driver boards around.
### Steps…
-
Hi i need some help getting my bl touch to work
about my setup i am using prusa i3 rework with a e3d hotend and titan extruder my bed is 200 x200 180
the bltouch offset is on the x 30 it is in the r…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
### Description
We build a test fixture for our printers which puts a 78.5 ohm resistor across the thermistor inputs to test MAX_TEMP. It works fine for the hot ends, but for the heated bed I am ab…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
As I had a spare MKS SBASE, I decided to give it a try and replaced the RE-ARM/RAMPS from my printer. I also gave a try to some options I did not really test till now. With the SBASE, I got a more sta…
-
I installed BLtouch on my homemade printer with Marlin 1.1.9 recently and it doesn't compensate the bed leveling. Before I installed BLtouch, the bed limit switch for Z axis seems to work perfectly wi…
-
### Description
Hello everyone - I am submitting this as a bug because I truly do believe it is a marlin-specific bug. At our shop, we are currently dealing with a number of large-bed printers. We …
-
### Bug Description
This is Marlin bugfix-2.0.x, commit 0ebd2f44, running on a newly-built Hypercube with SKR v1.4 controller (which has TMC2208's on X, Y, and Z, and A4988 on E) and RepRapDiscount…
-
### I need help on my 3d Printer, the bed size is 400,400 but i only try to use 330 by 300 but when i do the bilinear auto bed leveling it would say probing failed at the 7th probe, i tried reduci…