-
The takeoff procedure is:
1. Set mode switch to Manual
2. Increase the throttle, the UAV takeoffs as a Rotary-wing.
3. Keep increase the throttle, the UAV increase its speed and altitude.
4. At certa…
-
This happened to my friend on the 5th flight with Ar 900 Wing. I launched the plane for him, the wing tracked out as normal. He switched to RTH mode while he was getting cozy in his seat and putting g…
JDFPV updated
5 years ago
-
I can't really find a specific character that crashes, but it happens when encoding this data.
```
%{"nittaku" => ["blade/nittaku-a--p-excellent-a-p.html", "blade/nittaku-aa.html", "blade/nittaku…
Hajto updated
4 years ago
-
Hello,
I have oscillating flying between two waypoints.
Watch a short video: https://youtu.be/RRVD-rZxHso
The oscillation is seen for 9, 10, 11 seconds.
I've tuned the parameters in inavflight …
-
`pwmShutdownPulsesForAllMotors` called from `pwmDisableMotors` and `stopPwmAllMotors` directly manipulates CCR register of relevant timer channels through `pwmOutputport_s.ccr`.
https://github.com/be…
-
### Description
Random layer shifts on different heights on both x and y axis, sometimes on both, sometimes just on one axis, reducing speed, acc and jerk, raising vref does not show any improvemen…
-
## Current Behavior
Wing disarms in areas where RXLOSS is often accuring
## Steps to Reproduce
1. install 2.2
2. use below configuration
3. fly in area/distance where RXLOSS occurs
## Expect…
-
I have recently set up a 1m fixed wing with an F411-Wing and iNav 2.1
I have trimmed it out and completed servo AutoTrim and Autotune procedures. However when I bank hard (I am intentionally limit…
-
##### ISSUE TYPE
- Bug Report
##### COMPONENT NAME
Ansible
##### ANSIBLE VERSION
```
ansible 2.1.1.0
```
##### CONFIGURATION
N/A
##### OS / ENVIRONMENT
N/A
##### SUMMARY
When I tried to convert s…
-
## Current Behavior
## Steps to Reproduce
1. Flash 2.2.0 RC1 or RC2
2. Arm
3.…