-
### Wiki Search Terms
TNC driver not detected
### Controller Board
6-pack
### Machine Description
Dual Y, X, Z . Nema 17, 24v. TMC2130. x 6
### Input Circuits
_No response_
### Configuration …
-
Slic3r 1.3.0
**Is your feature request related to a problem? Please describe.**
Many TMC stepper drivers feature an UART/SPI interface that allows on the fly motor current and operation mode (Stea…
Quas7 updated
4 years ago
-
I am using two K8200 printers, one with the standard nozzle (0.5 mm, drilled to 0.6) and one with a E3D V4 Hotend (0.4 mm). The extruder (gears similar to Wade's) are the same, just different stepper …
-
Hello All,
Running a Due+RAMPS+DRV8825 setup. I hit a wall with the DRV8825 in that the STEP signals do not follow TI's requirement of 2us min value. As such, the Y axis motor was not moving at all, …
-
Hello,
Recently started building cnc machine and for the brains I choosen the old creality 1.1.4 board With atmega1248p ic on it but the problem is how to make all steppers work because all step and …
-
Hi.
Would it be possible to add a way to control a Motor -> Backwards / Forward? Connected to GPIO?
-
I am having trouble with the x- axis stepper motor jumping ,not belt,not to hot printer raised 20MM off table,it will be printing nice then for no apparent reason moves(jumps) about 1MM off . the ste…
-
Hi there i am new to all this programming stuff i have a mks sgen v1 with tmc2209 on x, y, z, e1, axis and lv8729 on e0 i am trying to get sensor less homeing to work and dual z motors z, e1
i am…
-
### Wiki Search Terms
https://github.com/bdring/FluidNC/issues/1201
https://github.com/bdring/FluidNC/issues/1008
https://github.com/bdring/FluidNC/issues/1001
### Controller Board
![SCH_SCH_MAIN…
-
### Controller Board
Pen/Laser Controller SPI
### Machine Description
String art machine with external stepper driver on x, solenoid on y and servo on z.
### Input Circuits
_No response_
### Co…