-
Very intermittent UART control on 1.8.1 with Runcam Split V1 on latest fw v2.0 (or any other fw)
When it works the control acts like a toggle, I'm am unsure if this is even the correct. Regardless at…
-
Hello !
I try to fly a multi-rotor with gazebo simulation with the following configuration :
OS Version : Ubuntu 16.04
ROS Kinetic
Git tag : master
Xbox controller
When I want to fly, all the …
-
I can't seem to get any GPS mode to activate.
I have all green ticks, fully calibrated, at least 10 sats. I can arm and fly. When in the air if I switch into RTH, POSHOLD, or NAV WP nothing happen…
-
# Bug
I am using react-native-snap-carousel to generate a video feed for a user. Upon application load, I load up 3 "slides" and only mount the video component when the user lands on the slide. Onc…
-
I wanted to provide a bit more info to a question I asked before.
Can the Inav Matek F411 Wing with a GPS connected be used Stand Alone as just OSD without motors or a receiver.
For instance I h…
-
on my x12s running opentx 2.2.3 (eu/lua/no heli) the transmitter has entered in emergency mode twice while in flight.
on the first occasion i was at low altitude performing a roll and the tx entere…
-
FrSky SBUS Failsafe handling is buggy, and Ardupilot needs to protect for the issue.
We have seen undesired mid-flight motor shut downs because of the issue. Basically, FrSky "no pulses" failsafe …
-
In the `Settings` menu, change the "hotkey" for the `Window` submenu to `i` from `W`.
Currently the `Settings` menu has two "hotkeys" for `W`:
- `Word Wrap Settings...`
- `Window` (submenu)
-
in the iNav Configurator 2.0 Final
1) the RC channel 9 to 16 still missing in the mixer tab.
this was raise in https://github.com/iNavFlight/inav-configurator/issues/501
but no fix.
in CLI, …
-
Hello everyone!
This is an issue regarding the documentation (http://docs.rosflight.org/en/latest/). Since it links to this repo for issues, I submitted the issue here.
I have read the entire do…