-
Hi, I have a MatekF722 Mini, FW: InavFlight v.2.1.0. A model of about 15m from me -> the OSD freezing and on the radio commands the model did not respond and a crash followed.
Unfortunately, I do no…
-
Good evening,
I am new to px4 and I encountered an issue when trying to build a new airframe (following the tutorial [https://dev.px4.io/en/airframes/adding_a_new_frame.html](http://url)). The added …
guroz updated
5 years ago
-
## Current Behavior
Flying wing has two elevons per side
## Desired Behavior
Could another mode similar to flaperons be added that would work on elevons, so that the inner elevons drop, and outer…
-
Attempting to use ground assistance in regions with poor SBAS coverage can cause many satellites to be ignored (all GLONASS sats and even many GPS sats too). In the worst cases, this can cause GPS fix…
-
## Current Behavior
After calibrating the accelerometer, accgain_x is set to 8246, but the allowed range is 1-8192, preventing the copter from arming.
## Steps to Reproduce
1. Updated from 1.9.…
-
Hi And thanks in advance for the help and continuing development.
I am on my third build with the Matek 722 se but this is my first tricopteron this FC ( used kk and Eagle tree Vector previously). …
-
Abstract control surfaces logic (mixing, output, etc. mostly in attitude.cpp) and create an AP_ControlSurfaces library that can be shared between plane and copter (for hybrid vehicles).
-
HI New to INAV, attempting to set up Nav ALTHOLD, I can arm and fly without issue when I put the quad into Althold mode it immediately goes to full throttle and stays until I change out of atlhold wit…
-
Can someone check that there are control outputs on pins 5-8 on Fixed Wing Conventional aircraft. A Flying Wing using servo outputs 3 and 4 works OK but not for a Elevator, Aileron L, Ailron R, Rudder…
-
If you use a Taranis radio you may be interested to know that a collaborative effort is taking place to understand and use the telemetry that is available from a Taranis TX serial port. See https://gi…