-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please be very s…
ghost updated
5 years ago
-
In some cases above certain throttle value accelerometer starts to read garbage rendering inertial modes unflyable:
![image](https://cloud.githubusercontent.com/assets/11059099/17834772/1264506a-6793-…
-
The reported value appears to be a the raw 8-bit number with a percentage. Ie: a true RSSI of 99% shows up as 254%. Lower values appear as 248% etc.
-
#### Issue details
The airframe has four wing servos, each on their own servo output port on the pixhawk.
Channel list:
Ch1 : Right Ail
Ch2 : Left Ail
Ch7: Right Flap
Ch8: Left Flap
Goal:
…
-
### Description of problem or feature request
Stroke and shadow of .ass subtitle does not render correctly.
I heard about HandBrake and want to give it a try. Batch process is way better than Me…
-
Here's the **Weekly Digest** for [*PX4/Firmware*](https://github.com/PX4/Firmware):
- - -
# ISSUES
Last week 60 issues were created.
Of these, 21 issues have been closed and 39 issues are still ope…
-
## Current Behavior
If I use my trim on my transmitter it's totally impossible to fly a fixed wing any more. The problem is that if you move the stick to fast to the side where you also moved the tri…
-
For immediate help, just ask your question on one of the following platforms:
* [Telegram channel](https://t.me/INAVFlight)
* [Facebook group](https://www.facebook.com/groups/INAVOfficial)
* [RC …
-
Hi everyone.
I recently bought an Omnibus F4 pro v3 FC (no clone) in order to hook up a gps and using inav. So I also bought a m8n gps /w compass.
Cause I’m using a xsr rx I need to have SBUS.…
-
#### Issue details
tried to run RC_UART on PX4-V1 with input data from qualcomm snapdragon.
can not get ESC_MAGIC F7
#### Version
_What version was the issue encountered with_
#### Platform
- [ ] …
parvu updated
6 years ago