-
I have a problem with the Naze32 10DOF, and GPS. I have 2 Neo-6M modules, that connect well to the u-centre, and get many sats, low HDOP, and a fast fix even indoors, but, when connecting to the naze,…
-
Don't think I want to waste too much time on hacking the kernel to make the crappy chinese radio work with UVC devices any more. Its performance stank, and it also messed up the timestamps to such a s…
-
I am trying to submit the antenna position with str2str -p with rtklib 2.4.2 p11.
Therefore I like to use a position which I get with rtknavi.
In rtknavi there are the following options to display the…
-
Hi, it looks like ardupilot/libraries/AP_GPS/AP_GPS_NMEA.[cpp|h] only recognised GPS messages, not GLONASS or GNSS messages. The first two characters of the message determines the constellation type…
fnoop updated
8 years ago
-
Imagine you have
``` java
enum LocationSource {
GPS,
GLONASS,
NETWORK,
OTHER
}
```
And a test that should verify that behavior for `GPS` and `GLONASS` is the same:
``` java
@Test
@Only({GPS…
-
Hi,
The french TTS voice for GPS signal lost/restored is a bit flaky : for lost signal, the voice says "Signal GP S restauré", with a noticeable pause between "P" and "S" which sounds very awkward.
…
-
**Reported by lpbjunior on 7 Jul 2014 19:45 UTC**
Dear all,
The transformation parameters values currently available between ''SAD69'' to ''WGS84'' ''DATA'' doesn't correspond to the official transf…
-
I've found that latest stable and beta branches in ekf2 mode (make px4fmu-v2_ekf2) has
strange oscillations when copter is standing on the ground (armed, but without props).
ekf2 estimator (beta) c…
-
#### Issue details
because in AP_GPS_NMEA.cpp data compared with GPVTG GPRMC etc so ARDUPILOT want to listen NMEA v2. But new multi-system modules emits NMEA v4 where messages has prefix GA for Galil…
-
There is a problem with task definition on my KOBO + Pa6c GPS. When task is defined, after setting up gates, the overlay says NO TSK START.
Here you can find igc + nmea logs + tsk setting etc.
https:…