-
Support for updating the Crazyradio firmware should be added to the GUI and to the library. Currently this can only be done using the command-line.
---
- Bitbucket: https://bitbucket.org/bitcraze/cra…
-
When disconnecting and reconnecting multiple times it has been observed that some port callbacks that are registered on connect are not unregistered on disconnect. This should be fixed.
---
- Bitbuck…
-
I just received a new CrazyRadio PA in the mail, and attempted to follow this tutorial to flash it today, and ran into the following problem:
root@kali:~/tools/keysniffer/nrf-research-firmware$ make
…
-
I want to make the project easier to understand for new contributors. I think the most important thing is adding code comments, followed by adding more tutorial-type content in readthedocs for differe…
-
The offset that is added to the data in the plot is wrong. For positive data the values should be subtracted (since y grows towards the bottom of the screen), not added.
---
- Bitbucket: https://bitb…
-
Is there any possibility to add all the buttons of the PS3 controller?
I would like to use the L2 and R2 for stuff like thrust control.
Or maybe L1 and R1 to change the yaw together...
---
- Bitbuc…
-
When connecting to a Crazyflie that has a TOC that is not in cache, the logging will not work. This is fixed by disconnecting and reconnecting again. The TOC is then read from cache and the logging is…
-
Hi Benoit,
Great work and thanks for sharing! I found your thesis after finding this repository and it is being a great read!
I was wondering which firmware for the CF2.0 you would advise to downloa…
-
Some of our python projects use precommit to run a set of static code analyses tools. When running precommit from the bitcraze/toolbelt on linux there is a problem related to users.
On linux the bui…
-
After initiating the radio scan a few times in a row, the red LED on the Crazyradio does not light up anymore and the USB connection seems to be lost. Re-connecting the Crazyradio and restarting the a…