-
Are there any plans on mainlining the spi driver?
-
Driver: Ben
Team: @APLSmith
Interested: @cecilepompei @laurareynal @corinagardner @davidascher
Alex and Ben meeting March 25th to create document on scope of research.
Based on: https://foundation…
-
I'm pretty new to all this but I followed AAlliieennX's instructions exactly, purchased the recommended hardware, flashed from the github page with "esphome-econet.esphome-econet: github://esphome-eco…
-
### The problem
I noticed an issue with the Econet integration where the sensor for the built in leak detection is showing "closed" when the valve is actually in the "open" position. It looks like th…
-
### The problem
On 4/21/24, I began to receive errors with my Rheem Econet integration: "Failed Initialization, will retry" after a restart. I removed the integration, restarted the system, and then …
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### I'm having the following issue:
I've got heat pump with ecoMAX360 (it is branded by HeatingPoland, Krommler) w…
-
### The problem
Climate entity auxiliary heater is deprecated and will be removed.
Please see the blog post https://developers.home-assistant.io/blog/2024/03/10/climate-aux-heater-deprecated
### Wh…
-
I am using an embedded board, which can either boot from sdcard or nand.
I have successfully used the 8188eu driver (when booting from sdcard) with the TL-WN725N, both to connect to a network and as…
edn1 updated
10 years ago
-
### The problem
I'm using the UI to create scenes for turning off the Econet water heater, and the water heater turns off correctly while setting up. However any time I call a scene or automation th…
-
## Version of the custom_component
0.0.1
## Configuration
```yaml
skydrop:
client_key: !secret skydrop_client_key
client_secret: !secret skydrop_client_secret
```
## Describe…