-
# Thrustmaster t3pa pedal Load Cell Mod | Simonas G
Based on some forum posts, blogs and this Youtube Video I made a load cell pedal mod.
[https://slowlogicboy.github.io//electronics/sim%20racing/TM…
-
Hello, I'm trying to use 4 50kgs loadcells with a nodemcu and an hx711 to create a Bed Presence Sensor.
[This is my circuit](https://selfhostedhome.com/wp-content/uploads/2018/09/schematic.png)
…
-
Hi. I have a problem getting the readings from the load cell. I think I connected everithing right.
Also, I have problems running the motor. Nothing seems to happen.
I am using the Arduino UNO. Ma…
-
While working on making the calibration jig, I calculated that the deflection of the bold holding the loadcells to be roughly:
`65mm * (11 kN / (150 GPa * 19 mm^2)) = 0.25mm`
Potential idea is …
-
Hi and best regards to the creators.
the "read()" function at the end of the "set_gain(byte gain)" cause halting CPU when there is no response from module when calling "begin()" .
I think the simple…
-
![image](https://user-images.githubusercontent.com/55515949/88336359-b4bdb800-cce9-11ea-9bb2-015001d54ed4.png)
This is a screenshot of a function from an example file for coding the IMU discussed in …
-
## Software
- [ ] Finalize load cell class, store some data in the LC class, make more generic for future use with other drivers
- [ ] Add calibrate methods to find reference unit automatically
- […
-
This annoying behavior was alrady reported in issue 3845, but seems not to be solved.
**Printer type** - [MK3.5]
**Printer firmware version** - [5.5.2]
**Original or Custom firmware** - [Orig…
woecj updated
1 month ago
-
* -90 90
* +15
*1 ~ 5 kg
dymnz updated
6 years ago
-
![modifiedADCbonsaiScript](https://github.com/AllenNeuralDynamics/Aind.Behavior.BciNoMovement/assets/88734358/3910a558-2d00-4ed0-aa79-d9be76d37656)
Ignore 2pHandShake is a button on the behavior …