-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
When trying to home the Z-Axis withe Biqu MicroProbe, the printer simply climbs the Z rail 10mm at …
-
### Cura Version
5.9.0
### Operating System
Windows 10
### Printer
Creality Cr6 Max
### Reproduction steps
Open Cura slicer with the recent update.
Enable the "Scarf Seam" feature.
Print a mo…
-
We appreciate you go through Apollo documentations and search previous issues before creating an new one. If neither of the sources helped you with your issues, please report the issue using the follo…
-
Today, there are many different clones of the Wanhao Duplicator i3 Plus, with small differences. In order to better support them in ADVi3++, I am trying to get an exhausitve list of these clones. So f…
-
**Dasharo version**
v1.4.0
**Dasharo variant**
nv4xmz
**Affected component(s) or functionality**
Suspend
**Brief summary**
S3 (Suspend to RAM) suspend mode is not recognised in the …
-
```
Temperatures
label temp1 "Motherboard"
label temp2 "CPU MB"
label temp3 "Auxillary"
label temp4 "VRM"
label temp5 "AUXTIN2"
label temp6 "CPU (PECI)" #Almsot always…
-
References:
https://github.com/OpenIPC/firmware/issues/993#issuecomment-2059540801 (by @csvke)
This is tracking the effort to support the IF-SD-WIFI board support. Currently it carries an Altobe…
-
Hello,
i dont know why but i cant control the Speed of the FAN0 for part Cooling, it only starts on 100% , 99% just make it stop...
on my old creality mainboard there was no problem, since i insta…
-
I'd like to use the calibration function with a 2021 QNED model, more specifically a 65" QNED919PA, to upload LUTs generated with DisplayCal. Due to the risk of bricking the mainboard, I wanted to ask…
-
```
What steps will reproduce the problem?
1. Using 3 bluetooth dongles with one instance of the same application for
each dongle.
2. Performing device inquiry and service search and OBEX Put simultan…