-
This remote is too good to legacy this quick, would be great to use it with modern ESCs on modern h/w
-
Hi,
I'm from University of Michigan, I have a VESC 6 MKiv and im using it for my autonomous car research project. My current implementation is similar to the F1Tenth and MIT-racecar repositories and…
-
Hi there,
I downloaded BLDC firmware from https://github.com/vedderb/bldc , built it using terminal in UBUNTU 18.04.1 LTS and flashed bldc firmware into VESC6 MK4 using VESC tool 2.06. The SHA for ab…
-
Hi Guys,
i have here a hardware equipped with the STM32F446RE, which i thought could be nearly compatible with the used F405/7 but thats was not the case...
So i updated Chibios from version 3 t…
-
Hello,
I'have try to use the `setLocalProfile` method from your library.
But in my case, it is not working. When I send the data, the VESC reboots or it becomes bricked.
I may be wrong, but it…
-
Hi I am trying to convert my xiai esc to vesc but the vesc tool app won’t recognise it any help would be appreciated
-
Hey,
I have ported the updates for the vesc driver - specific to IMU from ROS2 branch to support a ROS1 noetic.
I have tested it on the following [VESC EDU board ](https://trampaboards.com/vesc-6-…
-
Hello, I would like to know if it is possible with your library to make a setup motor foc as in vesc tool.
If possible, do you have an example?
Thanks in advance,
Vincent LAMBERT.
-
Both bldc and vesc tool official version are 6.02 (March 12th) : https://github.com/vedderb/bldc/commit/f7c2b34e1cff2234cae98be3abf0cd50e249558f
But support for 100_250_mkiii has been added later (…
-