-
My system is a RPI3 (Debian 12) with a vcan0 interface getting data via cannelloni and running Signal K Server version 2.6.2.
If I use canboatjs for a data connection the data comes in only for about…
-
My LDO Voron 2.4 kit came with 2 strip LEDs for the chamber light. Their combined current requirement is 580ma @ 24v. The Leviathan has a limit of 350ma (LM3407MY). Is there a suggestion for a replace…
-
I have just upgraded 2x Raspberry Pis, one 3B+ with 2.90-14 Pi2, and one 3B with 2.90-14 Pi2 Large.
I have a Canable Pro which has been working for a few years with previous release and the manual in…
-
Dear author,
Thanks for your great work.
As restricted by my memory, I have to run this project on nuScenes v1.0-mini, then following error occured,
the error indicates that the number of sample to…
-
Hey guys.
I'm looking at the documentation and I can't tell where exactly I'm supposed to plug what in to what. If you could put together a couple of sentences or a diagram of how to attach the e…
-
Hello！When I run the following command：`python tools/gemap/custom_nusc_map_converter.py --root-path ./data/hdmap/nuscenes --out-dir ./data/hdmap/nuscenes/full --extra-tag nuscenes --version v1.0 --can…
-
this lib is for master or slaver？
thank you！
craig
-
Hi!
I have a brushless motor driver that supports CANopen, and I would like to control it in profile velocity mode. The driver supports only 3 modes
1: Profile Position Mode
3: Profile Velocity …
-
Hi!
I am using a dbc file that uses a multiplexed value on some ID.
While using the dbc file I noticed that the datalen of the CAN message changes depending on the MUX it is dealing with.
For…
-
I had a problem with newer ESP32xx MCUs, as they apparently are not compatible with the included ESP32 code for the internal ESP32xx CAN interface. (Now named "TWAI" by Esperssif.)
Luckily this has a…
red8o updated
9 months ago