-
It seems that fpvexchange.com is down. Is there another way to buy the carrier board and/or premade units?
-
#System
Taranis X-Lite Pro
Expresslrs 3.2.1
Betaflight 4.4.1
Current Version of this Script
on FrSky it worked, but Today I switch to Expresslrs.
## If you believe there is an issue with the…
-
## Current Behavior
During flight some OSD elements randomly disappear, of which never come back unless you power cycle the FC and Goggles. This happens at random in flight whether you are close in (…
-
### Describe the bug
My foxeer M10Q 250 GPS module does not work on my 5 inch quad running betaflight. The weird thing is that I have the exact same module and that one works on this drone. Is it a b…
-
### Describe the bug
I have a 7 Zoll drone and used a Radiomaster RP3 Express LRS Reciver with a Mamba F405 MK2 Board and all worked. Now I changed the Board to a SPEEDYBEEF7V3 connected all togeter …
-
### Describe the bug
Barometer is not detected at all using DIATONE MAMBA MK4 H743 V2 FC and BF 4.4.3. In the specs of this FC is stated that is using a SPL06 barometer.
I am not sure if this is a …
-
## Current Behavior
I flashed all my drones. On some of them i changed OSD Elements via Betaflight OSD directly after flash & model missmatch correction (turn on and off again).
When i then saved …
-
I have run through every option of current sensor configuration and mV offset. Best i get it reads idle amp motors off 0.7 right. Then doesnt really move till 30% then goes up fast from there. Though…
-
### Describe the bug
After flashing to 4.4.1, I can no longer connect to the FC via USB. Reverting to 4.4.0 or earlier via boot button DFU restores normal operation.
[Note that the "Support ID" …
-
### Describe the bug
In Betaflight 4.4 RC3 you cannot turn on the Baro option via the CLI or GUI. The GUI allows you to turn the baro switch on, the configurator reboots on save, and yet the change …