-
Hi.
I am confused. I installed a clean copy of Lazarus 1.8.
I tried to install your components but it is looking for iNet Visual.
Where do I get that? You state you are using LNet so I am a bi…
-
Context:
I built an OpenBuild Workbee type Machine
I use an Arduino Due + g2Core to directly (without any shield)
it drive four(4) external stepper motor Drivers (DQ542MA)
I'm using the latest g2C…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
Hi,
I got a MC33926 connected to an PCA9685 expander and am really struggling to get a motor running. I've tried both 2 (pwm, dir) and 3 (pwm, dir, cdir) pin configurations with different pins and inv…
-
I have prepared the following repository to be added to the Arduino Library Manager
Zumo Automation
Url: https://github.com/BrandeisMakerLab/Zumo-Automation
It allows the Pololu Zumo Shield robot…
-
The Romi control board and encoders are a little different from the 32U4 board you used for this projects, and as a result you code isn't reading the encoders. Any chance you can update it for the new…
zlite updated
5 years ago
-
.Hi all,i need some help with a homebrew cnc laser engraver,to start its using an arduino with a cnc sheild running gbrl 1.1f,1.25mm pitch leadscrews driven by nima 24 steppers,im trying to use laserg…
m3vuv updated
5 years ago
-
Calibration update & issue
The Calibration document refers to a program Ion Studio at
http://www.ionmc.com/downloads.
This link redirects to
http://www.basicmicro.com/downloads
and the program…
-
Not entirely sure what the source of the problem is however here are the symptoms:
- Both flywheel motors stop turning (most commonly seen after extended use)
- Single flywheel motor stops turning…
-
### Bug Description
This is Marlin bugfix-2.0.x, commit 0ebd2f44, running on a newly-built Hypercube with SKR v1.4 controller (which has TMC2208's on X, Y, and Z, and A4988 on E) and RepRapDiscount…