-
INAV 2.0 Matek F411 FC Disarming in Flight! Mini AR Wing
Using INAV 2.0 on a Matek F411 FC. Default settings for the 600mm wing presets. I also followed the steps to enter the commands in the cli …
JDFPV updated
5 years ago
-
## EDDI version in which issue found
eddi 3.0.1 rc-3 VA
## Steps to reproduce
1. Accept wing mission to deliver cargo
2. Obtain more of the amount of cargo (I had over double) than required to f…
-
PX4 1.7.3
QGC 3.3
Joystick: Mad Catz F.L.Y.5
Flying Wing. (VTOL)
When Joystick/ No RC Checks is used on arming it reports manual control lost and commands RTL which is rejected with a message Rejecte…
-
I have this project which consists of a SPRACINGF4EVO and a Raspberry Pi Zero, but I have a few problems with MSP_SET_RAW_RC and MSP_RC. My first problem is that when using MSP_SET_RAW_RC the drone do…
-
Look on "FreeCAD Glider" add-on:
- https://github.com/booya-at/freecad_glider
Maybe, you will try cooperate with @booya-at for improving your and his add-ons ;-)
ghost updated
6 years ago
-
### Board and Version
INAV/OMNIBUSF4PRO 2.0.0 Jul 6 2018 / 21:46:22 (b569c3051)
### Behavior
I recently upgraded from 1.7 to the latest GitHub version (full chip erase and manual reconfiguration…
-
(This message is addressed to people who are in the list of Assignee, not to everyone else)
Hi guys!
EZwfb project that I am hosting code of on Github is in need of new enthusiasts who love the …
-
Plane does not pass pre-arm cheks. If the sensor is ICM20608 it is confirmed.
- The board is this: https://www.banggood.com/HAKRC-Omnibus-F4-V3-Flight-Controller-OSD-w-5V-3A-Power-Distribution-Board-…
-
I would really appreciate some help here, cause I am stuck for almost a week now. I have a brand new F405 wing and an L9R receiver. For some reason I get no sbus signal from the L9R to the FC. The rec…
-
Howdy,
What are your thoughts on adding a basic OSD menu system to change settings using the ele/pitch sticks similar to what is found on a Eagle Tree Vector.
See this video at 9mins 51s to see …