-
Hi,
Thanks for your great work.
Looks like gen_wts.py is not working with End-to-end.pth, and would you please provide more details on how to generate .wts file?
Appreciate very much if you can …
-
Hardware: Jetson Nano
OS: Ubuntu 18.04 w/ ROS Melodic and Jetpack
I cannot view the 3d map generated. The 3d map tab is completely empty. I've tried to install from source but the problem is stil…
-
Hi,
I've made a few functions in C which constructs a pipeline using nvinfer and this yolo lib.
When:
- Create a pipeline
- Run it (engine gets created 1st time and all works well)
- Cleanup pi…
-
I am using an arm64 borad and i want to use gstreamer to access video from IDS ueye camera. I am very new to these topics. I have tried much but I have problems installing these plugins. Could you pl…
-
We should consider supporting ARM64 / AArch64 for a subset of Drake, and what timeline might make sense to offer such support.
See #10435 and #20075 for sample requests, though I've also received a…
-
I tried your code with the orin agx,
but it seems that if I set the spi max speed to 500kHz, the communication works well but If I increase it higher than that, the communication becomes weird, is…
-
I have a setup with original hoverboard control board and battery and one sensor board connected to the right connector with RX/TX bridged to the left connector.
My right motor has two switched pha…
-
Hi, previously I had problem realizing realtime SSD detection with V4L2 format error which seems to be an opencv error. So I decided to reinstall opencv following the instruction. However, I got the f…
ncao8 updated
5 years ago
-
I am currently running ORB_SLAM2 with a ZED stereo camera on an NVIDIA TX1 embedded computer and I have a number of questions regarding setting up the system.
- In general, what settings can be altere…
-
Hi!
I consulted your GPIO pin data for the NX to find out the linux pin number for board pin 31 after moving from a nano to an NX, and found that it might be wrong?
in the line:
`(134, "/sys/de…