-
I see that this repo has support for Canon G3000. Kindly add support for G2000 too. Any kind I can to find out configuration parameters for this, I am willing to help.
-
Should be an easy fix.
-
Building with latest setup but still getting build failure. May be due to lack of understanding on my part.
Output below. Any help would be appreciated.
debuild -tc
dpkg-buildpackage -rfakeroo…
-
Hello
Thanks for making this code available. I'm trying to run it for the first time and I hit this error message when trying to register a single channel tif acquired with ScanImage. Image size is…
-
utsushi (utsushi list) does not detect the DS-1630 anymore if the device is
hot-plugged.
If the device is cold-plugged (connected before boot) detection and scanning
work as expected.
Some mor…
m1027 updated
6 years ago
-
Scanimage reports the FOV of the lens is 270 μm on each side. Printing full-FOV cubes results in 500-μm-on-a-side cubes. They do appear to be about 270 μm tall... maybe? Anyway, fix the reported FOV!
-
`scan.instructions` should include more scanner information such as actual `scanimage` argument string used and possibly version of `scanimage`.
At the moment only one setting is used, but this is …
-
Have Gui option to save the stack of images collected during printing. Then it would be imaged later, e.g. with tiffview.
-
The process of cutting off zero-fill slices (a) can move slice segments from their locations and (b) can result in a zero-slice segment. The latter will result in a ScanImage error, the former in just…
-
kubuntu 16.04 64bit
scanimage -L
device `plustek:libusb:001:006' is a Canon CanoScan D660U flatbed scanner
scanimage -A attached. Scanner is recognized, but I can't see any "Sensors".
Pressing t…