-
As reported in the depthai repository: https://github.com/luxonis/depthai/issues/1089
-
Hi, I've just received OAK-FFC-6P. I connected two AR0234 to ports A and B, the 5 V supply and USB cable.
I succesfully ssh'd into the board and updated OS to 1.8 and firmware to the latest.
The…
peci1 updated
6 months ago
-
**Describe the bug**
We just received the production units of OAK-D SR PoE, but it seems like one of the RGB camera sensors is not detected. I tried two different units and both have the same problem…
-
Hi,
I'm trying to run Gen2 Emotion recognition on a Raspberry Pi 4B.
I've installed depthai, tested it & its working but when I run your code I get,
_ModuleNotFoundError: No module named 'Mu…
-
I got my oak-d-lite fixed focus cameras and discovered that they do not id themselves as fixed nor do the autofocus apis throw errors.
At a minimum, I believe autofocus apis/commands to fail or throw…
-
When I try to run 0.1.4 depthai-viewer, I get the error below. I don't believe 0.1.4.alpha had this issue (I was able to boot my device). Dependencies were installed successfully. If I restart the Mac…
-
Hello Community,
I want to use luxonis camera in my urdf file for drone. Are there any tutorial for this?
-
Hello,
I am trying to use the Spectacular AI SDK's AprilTag functionality in order to get pose estimates by viewing multiple AprilTags with known poses. Here is an example picture from the camera:…
-
**What happened?**
Attempting to build depthai-core gets stuck on one nlohmann/json dependency.
Hunter tries to fetch [nlohmann_json/3.9.1/f8a20a7/151cbba/a23c16c/da39a3e/basic-deps.DONE](https://…
-
The depth data I can getting from my pre-production OAK-D-PRO-POE is significantly warped. As the depth xy location moves away from the principal point, the depth is too large. This causes flat surfac…