-
Joystick currently simply defines the target duty.
It might be useful or interesting to test other setting other target units.
## duty
current behavior
## current
- should behave like the pr…
-
@jfroco
Since your update i'm getting Joystick and Speed Notifications on the screen with every game I run. It's quite annoying. How do I turn these off without turning off my other notifications ?…
-
```
No radio input in HIL mode causes APM to not work. It works Ok with radio PWM
input but as soon as the PWM input disappears the autopilot stops navigating
and behaves oddly. PC joystick mode is …
-
```
No radio input in HIL mode causes APM to not work. It works Ok with radio PWM
input but as soon as the PWM input disappears the autopilot stops navigating
and behaves oddly. PC joystick mode is …
-
LED does not come on.
Connected 5V and VCC of LED, DIN to pin 5, GND to GND. Firmware is latest 0.8.
Did I miss another fix?
Thank you
ps. The LED bar is 5V, DIN, GND and is the one used in the …
-
Parameters (NOTE: mechanical doesn't have a design at the time of writing so we will need to flesh this out once there is a design)
- Button to initiate climb
- Analog control to move robot on gen…
-
Potential Requirements:
* One-click (and keyboard shortcut) to activate this mode
* Mode should be controllable using:
* Cursor keys + enter
* Mouse
* DirectInput / XInput devices (gamepa…
-
I'll be writing drive code for ESP's which will expect requests with parameters for relative power percentage to each side of the drivetrain. From the GUI's perspective, this will be based on the inpu…
-
hi after the firmware update from v 2.0.1 to v 2.4 i have a stuttering(shaking) movement when executing moveit servo.
i use the xbox controller to enter the direction.
what do i have to do to mak…
-
### Operating System
MacOS
### Board
Waveshare RP2040-Zero
### Firmware
Custom firmware, representative sample that reproduces the issue at https://github.com/cbrunschen/tinyusb_rp2040_print_devi…