-
https://arxiv.org/pdf/2305.14593.pdf
-
- [x] Run Basler-derived videos through calibration pipline
- [?] Run Basler-derived videos through mediapipe pipelines (e.g. the 'move your hand around in the capture volume' task)
- [ ] Visualized B…
-
# 下調べ
## google groups 情報
https://groups.google.com/g/pr2_users/c/QpReAo30eeA?pli=1
## full system calibration
https://wiki.ros.org/pr2_calibration/Tutorials/Calibrating%20the%20PR2
urdfの書き換えに…
-
### Bambu Studio Version
1.7.6.92
### Where is the application from?
Bambu Lab github releases
### OS version
Windows 11
### Additional system information
_No response_
### Printer
Bambu X1C
…
-
### Current behavior
After the user performs a calibration of the pH probe, the Tank Controller checks the new slopes. If at least one of the slopes is not between 95% and 105% of ideal, then the Tan…
-
In #55 the computation of d-spacing from calibration was effectively removed because we needed the wavelength, 2theta coordinates for adding masks.
We should be able to compute them from the final d-…
-
I just purchased the Unitree L1 LiDAR. Do you have a recommended calibration package for aligning the camera (RGB) with the LiDAR? I would like to replace my current workflow, which uses a RealSense R…
-
I have tried OAK-D-Lite calibration with both `main` and `lite_calibration` branches and found some problems.
Firstly, I ran calibrate.py in `main` branch with option `-brd OAK-D-LITE` then got th…
-
When I run Auto-Z-Calibration on the DX head (I *like* this feature!!!), since Firmware 1.15.19 the result is that the print starts about 0.3 mm too high, which I then need to compensate using the Liv…
-
Write a calibration suite to help align the guardrail costs of complex operations with repeated basic operations.
Node is not the browser, but some calibration is a lot better than none.