-
```
What steps will reproduce the problem?
1.plug in ESC/battery to LIPO to activate receiver/ APM system
2.
3.
What is the expected output? What do you see instead?
To activate plane/ APM2.5.
AMP wo…
-
Hello,
Im using repetier firmware 0.92.9 with filament jam detection on. The printer itself works fine, but sometimes has some Z-axis issues. At random height it just suddenly stops. The other 2 axes…
-
## Type of Issue
Follow-ups from https://github.com/facebookresearch/droidlet/pull/475
- [x] Write an api for navigation (equivalent of [this](https://github.com/facebookresearch/droidlet/blob/mai…
-
Josue, thank you for making the rpi hat and the dynamixel interface. After ordering both over the last year, I've run into an issue: I'm developing in Python and neither of them work with the Dynamixe…
-
I spent the whole weekend in getting the gripper worked. No chance. Can you please update informations for the hardware you used:
- RoverC or RoverC Pro? The 'old' RoverC has no dedicated 3pin port f…
-
### Controller Board
ESP32 Plotter Controller Rev B (aka "Emerald Dingo") https://github.com/theworkisthework/ESP32_Plotter_Controller
Mostly pin compatible with [Grbl_ESP32 CNC Development Board]…
-
Hello, im making this project and i need to use 2 servos in D1 mini. The objective its to control both servos separately in Google home app.
So far i made 1 servo working like a charm but i cant mak…
-
I am having an issue with my laser not firing at the correct spot relative to the actual job location. This in turns makes for some very jagged lines.
The problem presents itself as extremely obvi…
-
I propose adding two features to spindle_control.c:
1: Slowly ramp to pwm setpoint. Most PWM motor controllers will faithfully attempt to instantaneously start or stop a motor, causing massive curren…
-
### Is your feature request related to a problem? Please describe.
I'm searching for a firmware that support delta robot kinematics like that described in this paper: https://hypertriangle.com/~alex/…