-
The driver is the Pololu Dual VNH5019
https://www.pololu.com/product/2507
-
I have a Trinket M0 with the module connected to gpio pins 0/2 and gpio pin 3 as a pwm output for an LED (through a transistor). Circuitpython bundle build is 3.x dated 20180809 with the 3.0.0 uf2 fir…
rlake updated
6 years ago
-
For some unknown reason GPS functionality "suddenly stopped working" I'm getting 0 sats out in the open, exactly where there were never an issue with visibility.
I'm running v2.0.0, on a MATEKF405-…
-
Simple and useful to connect Tic to Raspberry Pi 3 I2C. Give it a try.
http://www.hobbytronics.co.uk/mosfet-voltage-level-converter
Maybe include this circuit in the manual.
-
Please add our VL53L1X library to the library manager:
https://github.com/pololu/vl53l1x-arduino
Thanks.
-
hello, i don't have much experience with i2c connection.
how can i connect 6 different vl53L0x in one bus?
i have tried to connect all of them parallel; 5V, GND, SDA, SCL. it just shows one addr…
-
https://github.com/pololu/vl53l0x-arduino/blob/22d997afc59625d14c3940d54dfd6d1800efa627/VL53L0X.cpp#L1031
VL53L0X_ClearInterruptMask sets SYSTEM_INTERRUPT_CLEAR to 0x00 after setting it to 0x01. Cu…
-
Tras el préstamo de la impresora, descrito en #30 , es momento de comenzar a trabajar con ella.
En esta Issue se debe centralizar el trabajo hecho sobre Dédalo hasta que se encuentre operativa.
…
-
- [ ] Go tweak with config.json files.
-
We need support for the VL53L0X distance sensors. There is functional code for Arduino here: https://github.com/pololu/vl53l0x-arduino .
If you do not have time or interest in adding it we're ready t…
xopxe updated
6 years ago