-
Hi Ricardo
Situation
Remote or inaccessible igate. Power failure and subsequent restoration
Issue
If the wifi AP takes longer than the igate to recover on power restoration, the igate does no…
-
A request if it would be possible to read sensor data from a wind vane and wind speed, then forward to aprs network.
This would be the perfect solution for a remote aprs wx station (with wind meas…
-
I got a hint about problems when using a T-Beam V1.2 in combination with a SH1106 OLED. So I connected both OLED types (SH1106 and SSD1306) to the I²C bus in parallel and did several compiler runs wit…
-
Similarly to what author of the issue #98 has been experiencing. The OLED displays entry information and it hangs when trying to initilize LoRa
```
E (228) SPIFFS: mount failed, -10025
[ 229][E][…
-
### Component
Forge
### Describe the feature you would like
While property-based testing (fuzz) should fit for most case of general testing, there are some other cases where a test function w…
-
# Lines of code
https://github.com/code-423n4/2024-06-size/blob/main/src/libraries/AccountingLibrary.sol#L173-L175
https://github.com/code-423n4/2024-06-size/blob/main/src/libraries/AccountingLibrary…
-
When using the email plugin, as soon as there's an email available to be read from my inbox via IMAP, the APRSD server keeps re-sending the same email message over APRS-IS multiple times. (See photo b…
-
Please can you implement the "wide1-1" string in the firmware?
-
Can anybody confirm that their T-Deck still works after last code changes? I updated an early May FW to latest source code, and it doesn't boot anymore - symptoms are constand disconnect and reconnect…
-
Hello,
I have compiled and uploaded the latest firmware and during the start I am getting the error "Destination APLG01, path Type Error Data" like on the below image. Then it can connect to aprs.f…