-
From @emiliom 's comment in #735:
> The form of the resulting Sv, after conversion and calibration, should be identical regardless of the source raw data type; if it's not, the test responsible for c…
-
Dear all,
Is there any module for auto geometrical calibration for CBCT tomography in the CIL package?
Thanks in advance,
Amirhossein
-
The calibration script doesn't have enough documentation to be used as is. I think I can figure it out from the issues (see conversation from https://github.com/quartiq/booster/issues/104#issuecomment…
-
Finish the calibration code started in "02_03_04_05_Test_Motor_Trimpot_Control.ino".
Do **NOT** use the code in "05_02_TestCalibartion_StepperDistance_Limitswitches" because this is pre-partitionin…
-
We're going to be manipulating things potentially with respect to two depth cameras, so we should do a standard calibration on the intrinsics ([the opencv one](http://wiki.ros.org/camera_calibration) …
-
Goal: The T400 can enter a mode where it can calibrate itself. This is perhaps with external hardware giving a specific reference voltage. Maybe the MCP3424 can be calibrated by shorting each differen…
-
Calibrate the MCP3424. Save data to external memory. Read data during operation. #
-
Calibrate the MCP9800. Save data to external memory. Read data during operation.
-
Hi all,
I am using an arduino 2560, a RAMPS 1.4 and an inkshield (http://nicholasclewis.com/projects/inkshield/theory/) to operate the pwdr printer.
I have been trying to understand the firmwar…
-
I've encountered an error while using the duo3d mlx for marker detection with apriltags.
I think it's an error in the calibration - but the apriltags node which gives me (relative to the camera) mark…