-
Hi, I have similar but 6500W version of inverter.
Is there any chance your protocol can be integrated with [this project](https://github.com/odya/esphome-powmr-hybrid-inverter)? I was trying to use t…
-
### Is your feature request related to a problem? Please describe.
Die aktuelle Berechnung des Batterie-Stop-Schwellenwertes mit Hilfe des „Load correction factors“ ist ein gutes Feature hat aber ein…
-
Hi Guys,
Did you notice incorrect values reported by integration?
![image](https://github.com/StephanJoubert/home_assistant_solarman/assets/154087783/407337bc-1045-4033-ad91-616c48b50f0c)
Tha…
-
Not strictly an issue about this software, but I was wondering if there is a way to poll the inverter through the RS485 interface (configured as SolarEdge protocol) for the same information it would p…
-
I installed GUI Mods on my cerbo GX on february 12th. Since then, when i check my consumption data on my VRM dashboard it only shows consumption when the inverter is turned on and doesn't show anythin…
-
Hello all,
I have a question in my charge config I have a charge curve for go down withe the
Amps near the max voltage. Can I also make this near the discharge limit?
My problem is that the bms…
-
I've added unique_id's for the sensor templates to this yaml. This prevent errors in HA (if you want to manage an entity). For example, the following code removes the mentioned issue for the Power sen…
-
I had been using it for a while to fetch data from my solar panels, and after a couple months my IP got banned. The app didn't work on my home network and the inverter was not able to send out data. I…
-
### Platform
ESP32
### Assembly
I did the assebly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
circuit board
### Power Stabilization
Elko (~100uF)
### Connection picture
- [ ] …
-
Hi,
I have a Growatt 3600 hybrid inverter where I need the information regarding: 'export to grid' is it possible to have this information?
![Screenshot_20240521_194837_ShinePhone~3](https://githu…