-
I'm getting the above error when I click upload. What have I done wrong?
-
In the terminal area, bad characters are returned from the ESP32.
A simple check with an other IDE, the EsPy IDE, demonstrates that this does not come from the microprocessors but from an approximate…
-
XYZ values from the accelerometer is fed into the CSV file from the parent device to which the sensor(MPU) is connected and is written from the sensor to CSV through serial communication. Sometimes, t…
-
Schaltet man bei aktiver Verbindung BSC zu MQTT den Accesspoint aus oder trennt man den MQTT Server vom Strom, so fällt das BSC kurz aus.
=> Keine Daten mehr an Victron => Anlage geht auf Störung
…
-
```
/lib/nut/usbhid-ups -a aeg -DDDDDD -d 1 …
-
Hi all, I use Tasmota based and other devices for my home automation for many years already.
I already also use the reduced version of esplink for transparent serial communication via wifi with other…
-
Hi,
I am using nanoVNA V2.
When I see the built-in display of the VNA, it seems to sweep all frequencies pretty quickly (though I don't know how many data points it sweeps but the graphs look reas…
-
```
I'm trying to use the nfc driver with this board
(http://www.ebay.com/itm/PN532-NFC-RFID-Controller-Breakout-Board-For-Arduino-UN
O-Mega-2560-A124-/261124109868) without luck.
I downloaded the l…
-
Hi
I am trying to use this library to interface Acclima soil sensors (TDT and with TDR315H) with Arduino/ESP32. When connecting the sensors and using the d_simple_logger.ino example sketch (after …
-
## Description
Once #7 is complete, create a post-processing node that subscribes cmd_velocity as well as other topics from goal setting node (e.g. ebrake topic) and then publishes the topic with fin…