-
```
Integrate a barometric altitude sensor to allow for much tighter altitude
control. This will be
especially useful for:
- automated landings
- hovering helicopters and quadcopters
- vertical …
-
The SITL Build in the 7.1 Configurator is based on a 7.0 Pre-Release (or RC) build Nov 19 2023 / 17:40:01 (dc19ce5a).
When applying a preset it locks up the configurator in a waiting loop.
Apply…
-
I want the offboard mode to support position setpoint and velocity setpoint at the same time.
## Describe problem solved by the proposed feature
Recently I'm working on the offboard mode in Fixed Wi…
-
Three minor misspellings on the scenario descriptions for 7, 8, and 12...attached below.
Scenario 7 (coordinated turn): should read "The aircraft must..."
Scenario 8 (yaw hold): should read "The a…
-
### Describe problem solved by the proposed feature
For fixed-wing vehicles, it is only possible to either specify a height setpoint or a height rate setpoint for TECS.
This is enough for most use…
-
### Describe the bug
Little Story:
Imagine you are flying a Fixed Wing in Manual mode and lose RC signal. When the RC signal lost failsafe is set to "disarmed", but the prearm mode is set to "alwa…
-
I fly with fixed wings and quadcopters, on fixed wings I use air units and on quadcopters I use caddx vista.
I like to record videos on the air units, but when I change from quadcopter to fixed wing,…
-
Hi all,
I am currently working on a VTOL Quad Tailsitter drone with no control surfaces like elevons, rudders, etc. More specifically, it’s going to take off like a multirotor drone and then transiti…
-
Hi guys,
thanks for fixing a lot of the update bugs.
I tried reproducing update bugs and found that one mentioned earlier (in #189) still exists:
1. open OpenVSP
2. Go to File -> open -> se…
-
### What happened?
Simply put when you put on any of the armor its a blocky mass of 1 color.
### BetterEnd
21.0.4
### BCLib
21.0.8
### Fabric API
_No response_
### Fabric Loader
_No response_…