-
Hi, I tried to use this demo and was able to get a better looking constellation(https://github.com/open-sdr/openwifi/blob/master/doc/app_notes/radar-self-csi.md), but the problem is thar the CSI phase…
-
Dear Professor Jiao,
I am currently using your OpeneWifi implantation of wi-fi chip for my Thesis.
Topic of my thesis is to use OpenWifi implementation of wi-fi chip and create program that will s…
-
May I ask which licenses Vivado needs besides Xilinx Viterbi Decoder license, because the Bitstream and HDF files we often compile cannot be used, thank you
-
Hello,
Are USRP devices (e.g. B210) supported or is there any plan to support it in the future? Following the conversation in issue #14, I guess that B210 would also not be supported but I am not …
-
Opencellid currently maints open database of cell towers and Mozilla has cell & WIFI database. They started cooperating some time ago - i.e. sharing collected information thus benefiting the whole com…
-
![image](https://user-images.githubusercontent.com/31478831/173376128-f263904a-84d2-4757-af0a-718110e4b26c.png)
Hello,
I did all step successfully, but when I generated the bitstream, I have the…
-
hello,
when I modify the sdr.c ,how can I make it work? Ssh to the board and compile it to generate sdr.ko, then insmod?
-
Hardware:Xilinx zedboard + FMCOMMS3
Steps:
1. The board and PC are in the same LAN. The board IP is 10.10.88.122 and the PC IP is 10.10.88.157. Ping is OK.
1. Modify Server address in side_ch_ctl.c…
-
Hello, I encountered an error when running the monitor mode of CSI. The board failed to get the CSI information . However, in other modes, the board can work successfully.The printed information is a…
-
Hi,
I am having the following problem with the iq_capture tool.
I send a continuous IQ signal and use the iq_capture tool to capture it, but each time I capture 4094 symbols it interrupts on…