-
I wanted to know whether dronekit support Pixhwak or Ardupilot APm mega filght controller?
ghost updated
6 years ago
-
#### Issue details
I fly in a very windy part of the world. I would like the ability to rotate the yaw on the Storm32 gimbal using the pixhawk flight controller in such a way that the gimbal is orien…
-
## Bug report
**Issue details**
Compiled and uploaded RCInput example on the board crash and produce serial failure (no ouput readable from the serial monitor and the port is not recognized) whe…
-
Thanks for your so wonderful project and share. I want to conduct your experiment but I face a localization problem really confusing me. When I use VINS Fusion and estimator td is 1 with initial value…
-
Hi,
Can you advise on the easiest way to replicate the same experiment on a pixhawk drone.
Thanks,
-
Hello! I have two identical Pixhawk 4 flight controllers with the same PX4 firmware (version 1.13.3), but only one of them have a list of parameters such as “UAVCAN_SUB_FLOW” and “UAVCAN_SUB_RNG” for …
-
I see in the 'expansion.md' file that SBUS is read on the CVBS pin.
Does it also need ground?
The document also says the signal needs '0x01 in first byte'
How do I know if my SBUS signal has the …
-
Hello guys,
We are trying to design our own LED module for the Pixhawk controller. As far as we understand there is a chip on the board that receives information from I2C bus then accordingly contr…
-
### Describe the bug
Hi,
I am getting the issue of **"[uavcan:125:vehicle_imu] Gyro 0 clipping, not safe to fly!"** | **"gyro 0 (2490C] 39.0 degC"** randomly in different flights.
I found these mes…
-
Hi,
I received a brand new Lidar-Lite v3 (2019/05) yesterday.
Hooked up to Arduino Leonardo by specification shown in thos document
http://static.garmin.com/pumac/LIDAR_Lite_v3_Operation_Manual_…