-
c’est mieux d’eviter l’utilisation des caractères speciaux dans la définition des class et id pour css. Mais le texte peut les utiliser
https://github.com/ndoubayo/webhtmCSS/blob/ccdda03533210ff25…
-
There are a number of constraints that will need to be introduced to the MVS.
@SabineHaas please think of possible constraints and also give a (sentence long) desctiption of the subsequent constrain…
-
The power supply had levels and harmonics of around -85 dBFS at the output. This isn't too bad but I would like to see it lower for something at the very beginning of the signal chain.
-
Rectifier les H1 - H2 - H3
H1: Uniquement sur la balise alt du Logo en haut à gauche
-> retirer le H1 de l'agence
-> remplacer les H1 Vos Objectifs, Notre Expertise, La méthodologie par des H2
H…
-
https://github.com/terryum/awesome-deep-learning-papers#understanding--generalization--transfer
-
The EMG sensor will basically be a custom version of this Myoware muscle sensor. We will be taking the raw EMG signal from the EMG electrodes, running it through a rectifier and a filter, then using a…
-
The 3.2.3 and 4.0.0 reference results for these models differ due to spikes in `rectifier.thyristor_p.idealThyristor[3].off` appearing in the 4.0.0 versions:
- `Modelica.Electrical.PowerConverters.Ex…
-
Hello @UngererFabien, comme mentionné en point ops ce matin :
[voici l'email ](https://mc.sendgrid.com/dynamic-templates/d-269913e926974a498ff7cf7f2529ebc6/version/a2562193-3db0-4bb0-9508-634ff655…
-
This is AC to AC (only), right?
I assume so cause there is talk of 200kHz in the README.
I am sure that for electronics connoisseurs, this will be obvious. but for me (a technician, but not knowledg…
-
In model 101, a single 5V DC input power source was used. The system depends on a external voltage source, typically provided by a brick adapter. This solution presents several drawbacks:
- Brick a…