-
#### Issue details
Now it seems that no way to inject RTCM messages from GPS RTK enabled base module connected to antenna tracker. It would be handy to receive correction within MAVlink from antenna …
-
Hi,
I bought Traxxas Stampede VXL to apply to PX4 (px4-fmu-v3-default for pixhawk 2.1)
and I changed air frame (50002, traxxas_stampede_2wd)
I followed https://docs.px4.io/master/en/frames_ro…
-
I have a number of vehicles I have built which run Raspberry Pi's hooked up via the serial port to a Pixhawk. Mavproxy is configured to start at boot. Some non-zero percentage of time mavproxy starts …
-
**Describe the bug**
The drone took off in position mode(EKF aided by motion capture system), moved few meters and landed. After landing, the drone was disarmed(using the RC switch), but the props co…
-
## Describe the bug
This is an issue found when testing alt/Position modes on 220 frame quad. Found on release/1.13
The FC is a Beaglebone Blue, but the issue could also persist on other autopilot…
-
![Untitled](https://user-images.githubusercontent.com/52990948/200124416-dc51533b-b2f0-4bb6-9f22-b27018a9f82d.png)
#### Issue details
_Please describe the problem, or desired feature_
hi, i have in…
-
See http://diydrones.com/forum/topics/using-aux-pins-as-relays-for-chdk?commentId=705844%3AComment%3A2062362&xg_source=msg_com_forum
This shows new circuit for cable. Evaluate how useful this is and …
-
### Describe the bug
Mavros: 1.16.0
PX4: v1.13.2
Ros: Noetic
The problem is shown in the video that when I switch to position mode, the autopilot will give error and auto disarm. I can get sta…
-
### Describe the bug
Hi all, I'm trying to run tiltrotor VTOL HITL simulation in Gazebo Classic 11. I have connected to QGC and made the necessary modifications to the sdf file (setting serialEnabled…
-
#### Issue details
I'm having an odd issue where the solution appears to compile ok but it never actually generates the files and there's no errors listed in VS2019. I also noticed that most of your…
sej69 updated
3 years ago