-
### Category
Other
### Hardware
T-Beam
### Firmware Version
2.4.0.46d7b82
### Description
1. Get new device.
2. Update to latest stable firmware with web flasher.
3. Install app on phone.
4.…
-
I have this little PCB that can hold several different STM32 CPUs. Among others (i.e. I currently have) 030, 103, 205, 303 and 405. Bravo to ST for making all these have the same footprint (even thoug…
-
Hello Stuart,
i have the problem that i can not restore my backup config. I have upload your last 3 Firmware from 27.12.2023 but in all i can not restore after upload my config. I upload my old con…
-
RT currently assumes all measurements passed to ROM are PL0. In a system where the SoC is the only other entity on this bus, the SoC can enforce this. In a shared bus system, this could be an issue.
…
-
> ciao Mattia,
> Quindi riepilogando, è necessario:
>
> 1) aggiungere il campo u_abdomnores di tipo Integer alla tabella utenza_sap;
> 2) modificare il codice per il calcolo della variabile n…
-
Questa pagina descrive la configurazione in via di sviluppo per i distaccamenti di Casalpusterlengo e Santangelo Lodigiano e la sala operativa di Lodi, con l'obbiettivo di generare commenti e suggerim…
-
Pen not working on SP7, Fedora 36.
Looking at quo's fork it seems the changes were merge into iptsd upstream, so I just installed the latest iptsd from surface-linux repo.
Do I still need…
-
I'm opening this issue since I have not found any dedicated thread on this topic.
The topic has been discussed here https://github.com/stnolting/neorv32/discussions/573#discussioncomment-5612033
…
-
https://wiki.sipeed.com/hardware/en/lichee/th1520/lpi4a/3_images.html
-
### Board
ESP32 WROOM 32
### Device Description
Esp32, in arduino using DOIT ESP32 DEVKIT V1
### Hardware Configuration
Nothing connected
### Version
v2.0.8
### IDE Name
Ard…