-
I suspect I got a fake chip. Below are the outputs of the verifier:
```
[ERR] Found unknown I2C device on address 0x68 with possible id's:
Reg: 0x75 Value:0x75
Reg: 0x00 Value:0xC7
```
Brea…
-
the dji naza gps/compass puts both over a single serial link not requiring the use of the i2c bus, if it was supported it would mean we could use dual external compass easily since there would be no i…
-
the first thing magneto does with the input sample is first expand each sample into a 10 item row/column, treat the input as a 10xN matrix, and multiply it by it's own transpose, resulting in a 10x10 …
-
I installed the library without smbus2 at first and it was running fake smbus correctly. After I installed smbus2 the example code stopped working. it gives an error 121. what should I do?
-
For example, the `logging` subdirectory is missing.
-
I am using sensor model MPU9250 + BMP280 and I cannot read the magnetometer sensor.
I can read the data of all other sensors, but the sensor named AK8963 gives the error in the picture.
![2022-11-12…
-
Hello, first of all: great work with the library, i really appreachiate it! I searched for quite a time for a suitable MPU9250 library that supports the FIFO and SPI. The bolderflight library dropped …
-
Instead of just using min/max values for mag calibration, it would be nice to do an ellipsoid fit like here: https://github.com/niru-5/imusensor/blob/master/imusensor/MPU9250/MPU9250.py#L378
-
[INFO ] [MPU9250Sensor:0] Connected to MPU9250 (reported device ID 0x75) at address 0x68
why my mpu9250 device ID is 0x75
if i modify mpu9250.cpp 0x71 to 0x75
it can start calibration, but
[D…
-
Hello,
I use
#include
#include
#include
#include
#include
#include "OneButton.h"
if I run screen u2g2lib, chrono, onebutton in first : no problem
After ESP8266 wemos D1 mini reboo…