-
Hello, I'm new to this.
With Arduino UNO, there are TX and RX pins for me to establish UART connection.
Which pins can I use to for TX and RX? Thanks.
-
[wrong.docx](https://github.com/uArm-Developer/UArmForArduino/files/1329985/wrong.docx)
Hello,I download your uArm-Developer library and and install to Arduino IDE.
I need Calibration the uArm Met…
-
FONA basic test
Initializing....(May take several seconds)
Configuring to 9600 baud
Attempting to open comm with ATs
---> AT
AT
AT
AT
AT
AT
AT
AT
AT
AT
AT
AT
A…
-
- [ ] work with different types of Arduino, not just Uno (this is in driver and firmware)
- [ ] Get pin assignments from Arduino headers
- [ ] Check if a pin is valid for functions like internal ADC, …
proan updated
10 years ago
-
Trying to update the Nina firmware on the UNO WiFi rev2 board and failing with error validating flashed firmware. I'm using IDE 1.8.12 and NINA firmware 1.3.0 for Arduino Uno WiFi Rev2 and the update…
-
I managed to install the Stino-Extension and the Arduino Uno works.
To use the Arduino Due in the original IDE do I need to install the "Sam software" via boardmanager.
Same for using the Due on Sub…
-
using this patch:
https://github.com/pat1/simulavr/commit/1a918c7b3ecdbccde7b991a11813c7677cb4f971
and a standardard build for arduino uno
defining a serial device working at 9600 baudrate I have to …
pat1 updated
10 years ago
-
### Describe the request
I use 4 boards: UNO, MEGA, NANO, and ESP32. It would be nice to have a "frequently used boards" menu to the **Tools > Board** menu.
### Describe the current behavior
…
-
```
What steps will reproduce the problem?
1. trying using the "GSM_GPRSLibrary_SMS" example, the modem is correctly
initiate but no any sms is read.
2. Tried to use getSms instead of ReadSms like su…
-
```
What steps will reproduce the problem?
1. trying using the "GSM_GPRSLibrary_SMS" example, the modem is correctly
initiate but no any sms is read.
2. Tried to use getSms instead of ReadSms like su…