-
#### Issue details
Running Master from 26 May on a 3DR Solo w/Lidar Lite (blue label) and PX4Flow. When airborne, the the Altitude in Mission Planner and in DroneKit show 0 in the GCS HUD and in VFR…
-
Hello all,
I am running arduplane 4.1.X with dronekit 2.9.2 and pymavlink 2.4.4. When I run the SITL sim_vehicle.py and connect the vehicle_state.py example code every thing works as it should…
-
## Background
In the PX4's MAVSDK tests, the function `wait_until_ready` relies on the `health_all_ok` function of MAVSDK's telemetry returning true, to determine if the system is ready (sensor calib…
-
**Describe the bug**
dispaly "BARO #0 faild : TIMEOUT!" in QGC.
**To Reproduce**
Steps to reproduce the behavior:
just like: https://docs.px4.io/master/en/simulation/hitl.html
![image](http…
-
## Describe problem solved by the proposed feature
I would like to be able to update the ESCs while they are connected to the flight controller using passthrough.
## Describe your preferred soluti…
-
```
What steps will reproduce the problem?
1. No overlay at all
2. video is ok from GoPro
3.
What is the expected output? What do you see instead?
I am only getting video from OSD. No overlay whatso…
-
```
What steps will reproduce the problem?
1. No overlay at all
2. video is ok from GoPro
3.
What is the expected output? What do you see instead?
I am only getting video from OSD. No overlay whatso…
-
```
What steps will reproduce the problem?
1. No overlay at all
2. video is ok from GoPro
3.
What is the expected output? What do you see instead?
I am only getting video from OSD. No overlay whatso…
-
When connecting multiple uavs the connection name in the upper right hand corner does not change.
This has been tested with APM Planner 2.0.20 on Ubuntu 15.10 with two uavs connected via udp (throug…
-
```
What steps will reproduce the problem?
1. No overlay at all
2. video is ok from GoPro
3.
What is the expected output? What do you see instead?
I am only getting video from OSD. No overlay whatso…