-
## **Version/Build:** information (checked for all listed platforms):
- **Haxe version:** 4.3.4 (all haxe builds were made with the -debug flag)
- **Flixel version:** 5.8.0
- **OpenFL version:** 9.…
-
Hello , me read this "And the best part is, it works! When the clock pin of the Arduino sketch is connected to the D+ pin of the AC6905, and the data pin of the Arduino is connected to the D- pin, the…
-
Is it fine to use this tool with Oreo image?
-
```
My intentions is to do mux config on 40pin IO expander, turning one of the MMC2
pin to become a GPIO that I wanted to control.
Is this ok to let the beagle stuffs inside the devkit8000_defconfig…
-
I have two usb adapters plugged into the router. mt76x2u chipset one is working and ath9k one is not working
```
[ 0.000000] Linux version 5.4.179 (builder@buildhost) (gcc version 8.4.0 (OpenWrt …
-
I am perpetually looking at a plot, and saying AHA! the weird thing about that one is that the route changed in the middle of that, I should write that down in case I look at this again.
So it woul…
dtaht updated
7 years ago
-
Scenario:
Hardware:
RPI3, 4.14.22-v7+, /boot/.firmware_revision: v634741d4199871ab8bd5446a8e63b7e06c1885af (latest by today)
Device: 3D Printer, FTDI Fake Chip: FT232RL, 0403:6001, SerialNumber: …
-
```
What steps will reproduce the problem?
1. connect OTG USB cable to phone (HTC Desire C) and to camera
2. launch DLSRdashboard
3. turn on D90
4. dashboard screen says 'no DSLR camera found on USB'.…
-
```
What steps will reproduce the problem?
1. connect OTG USB cable to phone (HTC Desire C) and to camera
2. launch DLSRdashboard
3. turn on D90
4. dashboard screen says 'no DSLR camera found on USB'.…
-
```
What steps will reproduce the problem?
1. connect OTG USB cable to phone (HTC Desire C) and to camera
2. launch DLSRdashboard
3. turn on D90
4. dashboard screen says 'no DSLR camera found on USB'.…