-
**Is your feature request related to a problem? Please describe.**
I'm using the Creality Laser Engraver CR Falcon SE which shows the firmware as Grbl 1.3a.
The generated GCode does not appear to …
-
**Versions**
- Candle version: 1.1.7 and Candle 1.2.15b x64
- Firmware version: 1.1
**PC info**
- OS: Windows 10 Home Single Language, Version: 21H2
- OpenGL version: 4.6
**Describe the bu…
-
I want to use my cnc as 3d printer too by changing the spindle with hot-end. So can grbl mega 5x work for 3d printer machine configuration and 3d printer software?
-
### Version
2.0.11
### Hardware / Firmware
GRBL 0.8c
### What happened
So my job stops every 10 minutes (more or less) and I get the message "finished sending file in 00:09:33": I can r…
-
I have a gcode file that was generated by flat cam. The gcode is inches and it begins with G20. My Arduino nano with grblv1.1 is set to $13=1. on the GRBL Tab this panel that says "Program limits" di…
-
SD-files on card not shown, upload new files gets rejected after showing progress bar.
I have formatted the sd card with fat32.
I am using an ESP32-CAM board.
I have run a script that reads, writ…
ghost updated
6 months ago
-
Hi Guys.,Could you make an instructional video using a TFT3.5 display and driver board (MKS DLC) running a CNC machine? That is NOT a 3D printer or lazer cutter and using the latest firmware available…
-
I have a problem with a laser engraver sculptfun S10 that I can’t solve. I want to use GRBL controller with this laser and it don’t work. I use an Android tablet with Android 11. When I use laser GRBL…
-
The BlackBox 4X in OpenBuilds Control had a 2 axis with Z homing disabled under the flashing tool. That option is not present for the BlackBox X32 I am using now. Can the 2 axis with Z homing disabled…
-
I am tryingto upload the firmware to an ESP32 dev module.
Instructions says "Go into the **ESP32 directory** and modify settings in grbl/config.h and CMakeLists.txt as needed. Pin assignments and b…