-
Great software. Although there are nuances. I compile for 512 kb, but there is no such choice.
When choosing the Ukrainian language, it gives a compilation error.
-
### Description
Random layer shifts on different heights on both x and y axis, sometimes on both, sometimes just on one axis, reducing speed, acc and jerk, raising vref does not show any improvemen…
-
Hi,
Linaer Advance not working on Marlin 2.0 with 32 bit board.
if i set it to 0 and i want to print a test, the Extruder engine do Nothing... like disabled...
can somebody help me please ?
on 1…
-
There may be a problem with one of the versions of platformio's **framework-arduinoststm32**.
I ran into a failure of a macro so I created PR #16589 to fix it. After that I ran into some other st…
-
Hej Guys.
I have compiled the 1.1.9 marlin to my corexy printer, and i have the probe sat at 30mm(-30) to the left of the nozzle. My bed size is x175 y165 (z242)mm when i do the G28 and G29 with th…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
### PROBLEM DESCRIPTION
I already wrote about the problem with Shater, when he starts giving an endless command:
https://github.com/arendst/Tasmota/issues/9310#issuecomment-693249119
I have upd…
-
Hi,
sorry for using this way to start a communication with you, but you have contributet to the Maril 2 SAMD51 implementation.
I have developed my own SAMD51 Board which use the SAMD51J19 MCU.
I ha…
-
No matter what I try my steppers will only twitch slightly with any jog command without turning. So far I have tried:
Three different boards: v3 w/UNO, v4 w/nano, eleksmana v5.2
4 different nema 17…
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…