-
Background: TotalSegmentator works extremely well. It stands out among other segmentation tools with its robustness and the large number of segments, but also with its low resource needs - especially …
-
### Controller Board
Own design
Limit pin goes through a 100ohm resistor
100nF capacitor in parallel
### Help From Board Vendor
- [ ] Yes
- [ ] No
- [X] Not Applicable
### Machine Desc…
-
## 问题描述
* 框架版本:8.0.0
* 问题描述:Activity1 竖屏 跳到Activity2 横屏 applicationContext 获取DisplayMetrics 的宽高不对,获取到的值是竖屏的值,应该是横屏的才对
* 是否必现:否
* 手机信息:小米k40
-
Hello All,
I'm attempting to scaffold some contigs using physlr. Here is the full error:
```
make: *** No rule to make target '../ssb_interleaved.fq.gz.k40-w32.n100-5000.c2-x.physlr.overlap.m85…
stLFR updated
2 years ago
-
[LSPosed_2022-07-11T20_32_28.615.zip](https://github.com/MonwF/customiuizer/files/9084008/LSPosed_2022-07-11T20_32_28.615.zip)
-
## 你正在使用哪个版本的 V2Ray?
* VPS: 4.45.0
* 手机端:V2RayNG 1.7.4(华为P30,EMUI 12)
## 你的使用场景是什么?
* 手机机型:华为P30,系统:EMUI 12
* 安装V2RayNG,当前版本:1.7.4
* 在亚马逊新加坡区域搭建VPS,上面部署V2Ray(模板:[VMess + WebSocket](https…
-
### Summary Description
Clicking "Set Current" on the config screen produces an exception (trace bwlo). This is with the k40 plugged in, m2nano board, and jogging around manually works.
### Addition…
-
My phone supports battery idle mode but acc says it's not working.
I found that it's because `test_charging_switch` function checks if `battery/status` contains "not" to determine if it's working.
H…
-
Device: RedMI K40 (POCO F3)
Android version: MIUI EU 13.0.5.0 (Android 12 SKQ1.211006.001)
Magisk version name: 756d8356
Magisk version code: 24312
Recently I upgraded my system from MIUI EU…
-
Device: RedMI K40
Android version: MIUI EU 13 0.5.0 (Android 12)
Magisk version name: v24.3
Magisk version code: 24300
When I flash the patched image to the phone with `fastboot flash boot m…