-
First of, thanks for the amazing work with this library!
I'm trying to get StallGuard to work with a TMC5161 from BGT (this one: https://raw.githubusercontent.com/bigtreetech/BIGTREETECH-TMC5161-V1.0…
totum updated
4 years ago
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When activating a second Z driver and EDGE_STEPPING, the first Z motor grinds and loses…
-
Hi, Using 4.3.9 Configured with the online configurator. Have 2 nozzles set up by adding the following to configuration_overall.h
#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE)
#de…
-
Issue:
The SPI bus cannot communicate with the “TMC5160 PRO” driver.
Notes:
• STEP/DIR work.
• Not able to communicate with SPI
• Tested two TMC5160 PRO drivers with the same result.
• Octopus…
-
Could you please add setting guide for klipper with corexy kinematics? How to define full_steps_per_ration, microsteps and etc?
Thanks.
-
This GitHub "issue" does not describe a real issue, but it is for writing TO DO lists of concrete actions required in Type-B work in general. The lists items are reminders and many will not necessaril…
-
Hi everyone, I am ending up in a very confusing situation. When I jog the machine while the spindle is turned off it works well but as soon as I kick in the spindle the machine starts to lose steps. F…
-
i run de last firmware 0.83
Ramps 1.4
Reprap Prusa
when the printer start to hit endstop mini. everytinh works grate but whene Z gos to start position so the extruder can heat up. the right motor just…
-
hello there
i dont have any programming knowledge
could any one help me how to set stepper motor as spindle in GRBL library?
im using 2 stepper motors for x,y axis , solenoid for z axis , stepper m…
-
Good day. Does anyone have the latest firmware update for BIQU B1 SKR V1.4?