-
I am running BPL 4 "new ui" on a ESP8266 chip (D1 mini), it boots fine and takes commands but after 10-15 min of controlling the fridge/heater it looses connection to the temp sensors and goes in to i…
-
Generally you can make a loop with mgc heater + boiler with railcraft turbine, because the steam is exchangeable with RC and steam to power ration is different for these 2 mods.
I'd suggest to rename …
-
Now when we are approaching the really cold months, it would be extremely beneficial for a Nissan Leaf to have more control for the battery heating. As you northern Leaf drivers might know, if the tem…
-
on the one hand o2heaterPin calibration field seems to be about narrow band control
```
field = "Heater output", o2heaterPin, { o2heaterPin != 0 || enableAemXSeries == 0 }
```
on the othe…
-
I have seen [thomas video ](https://www.youtube.com/watch?v=eGUPBoDxmKk) and I have done the 3 tests, thermistor tests work ok, but doing the heater one won't work, it should stop heating or reboot th…
-
This is not mine, but I'll open an issue to have it documented. The failure scenario when mixing up the MCUs seems concerning, we might add some steps to prevent that.
https://www.reddit.com/r/Sovo…
-
### Govee Device SKU
H713A
### Govee2MQTT Version
2024.01.24-ea3cd430
### Describe the issue
H713A is not presented as a Climate component in Home Assistant, which makes it a hassle to implement …
-
Hi,
Recently, i buyed a biqu B1....and after my second print, I received the message:
" Heating Failed, system stopped! Heater_ID:0"
Is it a hardware or a software problem?
I appreciate an…
-
I've just added my heater to HomeKit through Homey. It works quite well, but it isn't reporting the room temperature correctly... It just says 0 degrees in the home app on my iPhone.
Can this be fixe…
-
### Discussed in https://github.com/sfeakes/AqualinkD/discussions/171
Originally posted by **igorek24** April 23, 2022
My Jendy AquaPure SWG keeps turning on and off when AqualinkD service is …