-
I’m doing a project using a bare Attiny85 and an I2C Time of flight sensor (VL6180x).
The module has 10k pullups on the SDA and SCL lines, but I also added 10k resistors externally on the SDA and …
-
```
ipu6-drivers> CC [M] /build/source/drivers/media/pci/intel/ipu6/../ipu-psys-compat32.o
ipu6-drivers> LD [M] /build/source/intel_vsc.o
ipu6-drivers> LD [M] /build/source/mei_ace.o
ipu6…
-
I see that you have the bit data for the TSS Sparco handbrake. Does this support the handbrake natively? I've been looking into developing the I2C code to be able to use an Arduino to emulate an analo…
-
Hi! I tried build an orangepi-radio, but have small problem, need few info and clarification:
-I can't download the h3 consumption tool, because link doesn't work.
- I can't download the spotify k…
-
I am seeing intermittent detection of the octo card between boots, and random channel assignment within each iteration of speaker-test utility.
Note during these tests the hardware is sitting in is…
-
*Comment from me (kitakar5525)*
> Hmm, I use `is_acpi_node()` [1] to tell if the system is ACPI-based or not, in ov7251 and ov8865 (because original driver has DT support, I tried to preserve it). Wh…
-
Hi Kris,
First of all thank you for this amazing code! I want to read 12 mpu9250 with teensy3.2 and I'm worried about latency and fution rate! I have some questions and I would really appreciate if y…
-
Hi , when I was using version 6.1.0 the led strip used to work fine,
In version 6.1.1 is not working.
-
Needs to be rewritten to be cleaner and better coded, also needs more comments
-
Hi there,
I got the Picar Pro and I'm trying to get the webServer running and I get the following error:
```
Traceback (most recent call last):
File "/home/nick/git/adeept_picarpro/server/…