-
Hi Stuart,
Downloaed the latest code from patreon for the esp32 with the absorb float style menu options.
What i found is my current shunt (external board) now reads incorrectly, the bms reads the c…
-
I follow the [step-by-step-tutorial](https://github.com/bytedance/byteps/blob/master/docs/step-by-step-tutorial.md) to run distributed training with mxnet and tensorflow, both hang.
I have 3 nodes…
-
Hello Michael, would you please share how to get this run? My Setup is a Cerbo GX and Arduino Due. I was able to get data from the original [TeslaBMS](https://github.com/collin80/TeslaBMS) on Serial M…
-
Based on the guide of generic-amplicon preset, the reads are constructed as follows.
The read outputs that I am trying to process through MiXCR, however, looks like this. R2 has the UMI sequence…
-
Hi
After some extensive trial and error I have managed to figure out how to enable the write requests through the TTL interface. For the testing I just did some lambda code to make it easier for th…
-
Can merged file save bookmarks from source files?
And maybe add to merged file file names as bookmark?
Thanks to your work!
-
My system is using the Multiplus for battery monitoring and SOC calculations because the BMS is junk and unable to understand when the battery is full so it's reported SOC is just slowly drifting down…
-
Hi i have 3 BMS and the BLE ESP32.
Yesterday a low temp alarm went off after i checked i saw that BMS2 had 0C.
But not only temp was at 0. A lot of other values are also zero or wrong.
![grafik]…
-
### Robot Name 🤖
ergoCub 1.0 S/N:000
### Request/Failure description
When running the robot, the output of the ``yarprobotinterface`` is flooded by warnings related to issues to the CAN2 on the eb1…
-
If an archive contains just a naked `.pak` file with no `info.json`, Lamp ignores it.